97+ Decorative Plant Stand

paranjapeagro.com

Introduction: Elevate Your Greenery with a DIY Plant Stand Plant stands are a fantastic way to add visual interest to your indoor and outdoor spaces while showcasing your beloved plants. This step-by-step guide will walk you through creating a simple, yet stylish, plant stand that you can customize to fit your personal taste and plant collection. Let's get started!

Materials You'll Need:

• Wood (dimensions will vary depending on the desired size of your plant stand; consider using scrap wood or purchasing lumber from a local hardware store)
• Saw (hand saw, circular saw, or miter saw)
• Drill with drill bits
• Screws or wood glue
• Sandpaper
• Paint, stain, or sealant (optional)
• Measuring tape or ruler
• Pencil

Step 1: Design and Planning Before you start cutting wood, it's essential to have a clear plan. Decide on the desired height, width, and overall style of your plant stand. A simple design involves a square or round top supported by four legs. Sketch your design on paper, noting the dimensions of each piece. Consider the size and weight of the pot you intend to place on the stand to ensure stability.

Step 2: Cutting the Wood Using your saw, carefully cut the wood pieces according to the dimensions outlined in your plan. These pieces will typically include:

• The top platform (square, round, or any shape you desire)
• Four legs (all cut to the same length)
• Optional support pieces (for added stability, especially for heavier pots)

Be sure to cut precisely and safely, wearing appropriate safety glasses.

Step 3: Sanding the Wood Once all the wood pieces are cut, it's time to sand them down. This will remove any rough edges, splinters, and imperfections, creating a smooth surface for finishing. Start with a coarser grit sandpaper and gradually move to a finer grit for a polished finish. Pay close attention to the edges and corners.

Step 4: Assembling the Plant Stand Now, you'll assemble the plant stand. If you're using screws, pre-drill pilot holes to prevent the wood from splitting. Apply wood glue to the joints for added strength before screwing the pieces together. If you are using wood glue, clamp the pieces together and allow to dry according to the glue instructions. Begin by attaching the legs to the top platform. If using support pieces, attach them between the legs for extra stability.

Step 5: Finishing Touches (Painting, Staining, or Sealing) Once the plant stand is assembled and the glue has dried, it's time to add the finishing touches. You can paint the stand, stain it, or apply a sealant to protect the wood. Choose a finish that complements your decor and the environment where the plant stand will be placed. Allow the finish to dry completely before moving on. For paint or stain, apply even coats and allow to dry completely between coats.

Step 6: Final Inspection and Placement Before placing your plant on the stand, give it a final inspection. Ensure all screws are securely fastened, the finish is dry, and the stand is stable. Place the plant stand in your desired location and enjoy your beautiful, handcrafted creation! Make sure it stands stable before placing your pot.

Conclusion: Enjoy Your Handmade Plant Stand You've now successfully created your own DIY plant stand! This project allows you to customize the size, style, and finish to perfectly match your needs and preferences. With a little creativity and effort, you can add a touch of personal style to your home while showcasing your favorite plants.

Decorative Plant Stand

www.bestpalettes.com

Decorative Plant Stand

store.americansamaritan.org

Decorative Plant Stand

paranjapeagro.com

Read More

171+ Free Diy Woodworking Plans Pdf Free Download

pix4free.org

Introduction: Building a Simple Wooden Birdhouse Building a birdhouse is a rewarding DIY project that's great for beginners and provides a home for feathered friends. This step-by-step guide will walk you through creating a simple yet functional birdhouse from readily available materials.

Materials You'll Need:

One 1x6 inch board (approximately 6 feet long)

Wood glue

1 1/4 inch wood screws

Sandpaper (various grits, e.g., 80, 120, 220)

Exterior paint or stain (optional)

Drill

Saw (hand saw, circular saw, or jigsaw)

Measuring tape

Pencil

Clamps (optional, but helpful)

Step 1: Cutting the Pieces Using your measuring tape and pencil, mark the following dimensions on your 1x6 board. (These dimensions are suggestions; feel free to adjust them based on your preferences. Remember to adjust other pieces accordingly if you change one dimension.)

Front: 6 inches wide x 8 inches high

Back: 6 inches wide x 10 inches high

Sides (2 pieces): 6 inches wide x 7 inches high (taper one end from 6 inches to 4 inches to create a slanted roof)

Bottom: 4 inches wide x 6 inches deep

Roof (2 pieces): 4 inches wide x 7 inches deep

Carefully cut each piece using your saw. Ensure clean, straight cuts for a better final product.

Step 2: Assembling the Box Apply wood glue to the edges of the bottom piece. Attach the front, back, and side pieces to the bottom, creating a box shape. Use clamps to hold the pieces together while the glue dries. Alternatively, you can use screws to secure the pieces, but pre-drilling pilot holes will prevent the wood from splitting. Start by attaching the front to the bottom, then the back. Next, secure the sides to the bottom, front, and back. Be sure everything is square before the glue dries.

Step 3: Attaching the Roof Apply wood glue to the top edges of the side, front and back pieces. Attach the roof pieces, ensuring they overhang slightly on the front and back. Secure them with screws, again pre-drilling pilot holes. The overhang will help protect the entrance from rain.

Step 4: Drilling the Entrance Hole Choose a suitable location for the entrance hole on the front of the birdhouse. A diameter of 1 1/2 inches is appropriate for many common bird species. Drill the hole using a drill bit.

Step 5: Adding Drainage and Ventilation Drill several small holes (approximately 1/4 inch) in the bottom of the birdhouse for drainage. Also, drill a couple of small holes near the top of the side pieces for ventilation. These are important for keeping the birdhouse dry and comfortable.

Step 6: Sanding and Finishing Sand all surfaces of the birdhouse to remove any rough edges and splinters. Start with a coarser grit sandpaper (e.g., 80 or 120) and gradually move to a finer grit (e.g., 220) for a smooth finish. If desired, apply exterior paint or stain to protect the wood from the elements. Choose colors that will not attract predators (avoid bright colors). Let the paint or stain dry completely before mounting the birdhouse.

Step 7: Mounting the Birdhouse Decide on a suitable location to mount your birdhouse. It should be in a relatively sheltered location, away from direct sunlight and strong winds. You can mount the birdhouse on a pole, a tree, or the side of a building. Use screws or nails to securely attach the birdhouse to its mounting location. Ensure the birdhouse is stable and will not fall down.

Conclusion: Enjoy Your New Birdhouse Congratulations! You've successfully built your own wooden birdhouse. Now, wait patiently and observe to see which birds decide to make it their home. Enjoy watching the birds and the beauty they bring to your backyard. Remember to clean the birdhouse out once a year after nesting season is over.

Assistance Free

assistance.free.fr

Free Of Charge Creative Commons Free Image

pix4free.org

21 Free Resources For Authors

buildbookbuzz.com

Read More

97+ Easy Worship 6

blog.hellofresh.com

DIY Mini Greenhouse: Sprout Your Green Thumb Indoors! Ready to extend your growing season or just enjoy a touch of green indoors? This guide will walk you through building your own simple and effective mini greenhouse. Perfect for starting seeds, nurturing delicate seedlings, or overwintering small plants. It's an easy and affordable project that will bring joy to any plant enthusiast.

Gather Your Materials Before you start, make sure you have all the necessary components. The beauty of this project is that it can be easily adapted to use recycled or repurposed materials! Here's a suggested list:

• Clear plastic storage bin (with lid) The size depends on the number of plants you want to house.
• Seed starting trays or small pots
• Seed starting mix or potting soil
• Spray bottle with water
• Optional: Grow light (if natural light is insufficient)
• Optional: Heat mat (for quicker germination)
• Optional: Thermometer with humidity gauge

Step-by-Step Construction The assembly is quite straightforward and takes very little time.

1. Prepare the base: Place your seed starting trays or small pots inside the plastic storage bin. Arrange them in a way that maximizes space and allows for easy access.
2. Add your growing medium: Fill each tray or pot with seed starting mix or potting soil, leaving some space at the top.
3. Plant your seeds or seedlings: Follow the instructions on your seed packets or carefully transplant your seedlings into the prepared soil.
4. Water thoroughly: Use your spray bottle to gently water the soil. Make sure the soil is moist but not waterlogged.
5. Cover and monitor: Place the lid on the storage bin to create a humid environment. Keep an eye on the temperature and humidity levels inside the greenhouse. If using a grow light or heat mat, position them appropriately.
6. Ventilation (Important!): Regularly lift the lid to provide fresh air and prevent the buildup of excessive moisture, which can lead to mold growth. The frequency of ventilation will depend on the ambient temperature and humidity.

Placement and Maintenance Where you place your mini greenhouse and how you maintain it is crucial for success.

• Location: Place your mini greenhouse in a location that receives ample natural light. If natural light is limited, supplement with a grow light.
• Watering: Check the soil moisture regularly and water as needed. Avoid overwatering, as this can lead to root rot.
• Ventilation: As mentioned before, ventilate regularly to prevent excessive moisture.
• Cleaning: Periodically clean the inside of the plastic bin to prevent the growth of algae or mold.
• Monitor growth: Observe your plants closely for any signs of disease or pests. Take appropriate action if necessary.

Conclusion: Grow On! Congratulations! You've successfully built your own mini greenhouse. With proper care and attention, you'll be enjoying thriving plants in no time. This is a fantastic project for beginners and experienced gardeners alike. Experiment with different plants, lighting, and watering techniques to refine your setup and maximize your growing success. Happy gardening!

Limited Time Only! Casseroles On The Menu

blog.hellofresh.com

Limited Time Only! Casseroles On The Menu

blog.hellofresh.com

Easy Mac And Cheese With Bacon, Chicken And Peas

lifeasmama.com

Read More

177+ Woodworking

www.freepik.com

Introduction: Building a Simple Wooden Birdhouse Building a birdhouse is a rewarding project that provides a safe and cozy home for birds while adding charm to your backyard. This post will guide you through a step-by-step process of constructing a basic, functional birdhouse using readily available materials and tools. Let's get started!

Materials and Tools: Before you begin, gather the necessary materials and tools. This will streamline the building process and ensure you have everything you need at your fingertips.

Wood (Pine, Cedar, or Redwood recommended): Approximately 1 board foot (12" x 12" x 1")

Wood Glue

Nails or Screws (1 1/4" recommended)

Sandpaper (various grits)

Wood Finish/Paint (optional)

Measuring Tape

Saw (Hand saw, Circular saw, or Jigsaw)

Drill with Drill Bits (various sizes, including a size appropriate for your birdhouse entrance)

Hammer or Screwdriver

Pencil

Clamps (optional, but helpful)

Step 1: Cutting the Wood Pieces Carefully measure and cut the wood pieces according to the following dimensions (adjust as needed to suit your desired birdhouse size). These dimensions are for a relatively small birdhouse suitable for wrens or chickadees.

Front: 6" wide x 8" tall

Back: 6" wide x 10" tall

Sides (2 pieces): 6" wide x 7" tall (tapered, see step 2)

Bottom: 4" wide x 6" deep

Roof (2 pieces): 5" wide x 8" long

Use your chosen saw to make precise cuts, ensuring square edges where necessary. Remember to always prioritize safety when using power tools.

Step 2: Tapering the Side Pieces The sides of the birdhouse will be tapered to create a slight slant for the roof. On each side piece, measure 2" down from the top on the *back* edge (the 7" tall edge). Draw a line from this point to the bottom corner of the *front* edge (also the 7" tall edge). Cut along this line. This creates the angled side.

Step 3: Drilling the Entrance Hole Choose the appropriate size drill bit for the type of bird you want to attract. A 1 1/8" hole is suitable for wrens, chickadees, and titmice. Drill the entrance hole in the front piece, about 2" to 3" down from the top. Smooth the edges of the hole with sandpaper.

Step 4: Assembling the Birdhouse Begin by attaching the sides to the bottom. Apply wood glue to the edges of the bottom piece and clamp the side pieces to the bottom, ensuring they are flush. Secure with nails or screws. Next, attach the front piece to the sides and bottom using glue and nails/screws. Then, attach the back piece. It should extend slightly above the sides, creating a slight overhang. Again, use glue and nails/screws for a secure hold.

Step 5: Attaching the Roof Apply glue to the top edges of the sides, front, and back. Place the roof pieces on top, ensuring they overlap slightly at the peak. Secure with nails or screws. The roof should overhang slightly on the front and back to protect the entrance from rain.

Step 6: Sanding and Finishing Sand all surfaces of the birdhouse to remove any rough edges or splinters. Start with a coarser grit sandpaper and gradually move to a finer grit for a smooth finish. If desired, apply a wood finish or paint to protect the birdhouse from the elements. Use bird-friendly, non-toxic paints or finishes. Avoid painting the inside of the birdhouse.

Step 7: Adding Drainage and Ventilation Drill a few small drainage holes in the bottom of the birdhouse to prevent water from accumulating. You can also drill small ventilation holes near the top of the sides, just below the roof line, to improve airflow.

Conclusion: Ready to Welcome Birds! Congratulations! You've successfully built a simple wooden birdhouse. Choose a suitable location to mount your birdhouse, ideally facing away from prevailing winds and direct sunlight. Clear any branches or obstructions that might hinder birds from accessing the entrance. Now, sit back and enjoy watching your new feathered tenants move in! Remember to clean out the birdhouse annually after nesting season is over.

People At Woodworking Factory Stock Image

www.dreamstime.com

Woodworking Furniture, Woodworking Table, Woodworking

www.pinterest.com

Premium Photo

www.freepik.com

Read More

192+ Workbench With Built-In Power Strip

www.mysql.com

```html

Introduction: Building Your Own Powered Workbench

Ready to elevate your workspace? This guide will walk you through building a robust workbench with an integrated power strip, making your projects more efficient and organized. No more searching for outlets or tripping over extension cords! Let's get started.

Step 1: Planning and Materials

Before you start building, you need to plan the dimensions of your workbench. Consider the available space in your workshop and the types of projects you'll be working on. Once you have your dimensions, gather your materials. Here's a general list:

• Lumber: 4x4s for legs, 2x4s for frame, plywood or MDF for the workbench top and shelving (if desired).
• Screws: Wood screws of various lengths (1 1/4", 2 1/2", 3").
• Wood glue.
• Power strip.
• Electrical wire (14 gauge or thicker, depending on your power strip's specifications).
• Wire connectors.
• Electrical box.
• Outlet (matching your power strip's plugs).
• Tools: Saw (circular saw or hand saw), drill/driver, measuring tape, square, level, safety glasses, ear protection, wire strippers, screwdriver.

Adjust the materials list based on your specific design and needs.

Step 2: Building the Frame

The frame provides the structural support for your workbench.

Cut the 2x4s to the desired lengths for the top frame. Typically, a rectangular frame is constructed, connecting the four sides.

Assemble the frame using wood glue and screws. Ensure the corners are square by using a square and adjusting as needed.

Cut the 4x4s to the desired height for the legs. Consider the height that is most comfortable for you to work at.

Attach the legs to the inside corners of the frame using wood glue and screws. Make sure the legs are flush with the top of the frame and that they are square.

Add additional 2x4s for cross supports between the legs to enhance stability. These can be placed closer to the bottom for added strength.

Step 3: Attaching the Workbench Top

The workbench top provides the work surface.

Cut the plywood or MDF to the desired size for the workbench top.

Apply wood glue to the top of the frame.

Position the workbench top onto the frame, ensuring it is centered.

Secure the top to the frame using screws. Drive the screws through the top and into the frame.

Step 4: Installing the Power Strip

Integrating the power strip makes the workbench truly functional.

Decide where you want to mount the power strip. Common locations include the underside of the workbench top, along the legs, or on the side of the frame.

If your power strip has mounting holes, use screws to attach it to the desired location. You might need to pre-drill pilot holes to avoid splitting the wood.

For hardwiring the power strip (optional but recommended for a cleaner look), disconnect the power strip from any power source.

Cut the plug off the power strip's cord, leaving enough wire to work with inside the electrical box.

Install the electrical box at a convenient location near the power strip.

Run the power strip's wire into the electrical box.

Connect the power strip's wires to the corresponding wires from your main power source using wire connectors (white to white, black to black, and green/ground to green/ground). Consult with a qualified electrician if you are unsure about electrical wiring.

Install an outlet into the electrical box.

Step 5: Adding Shelving (Optional)

Shelving adds valuable storage space to your workbench.

Measure and cut plywood or MDF to the desired size for the shelves.

Attach supports (2x4s or smaller) to the legs at the desired height for the shelves.

Place the shelves on the supports and secure them with screws.

Step 6: Finishing Touches

Complete the workbench to ensure safety and longevity.

Sand all surfaces of the workbench to remove any splinters or rough edges.

Apply a finish to the workbench to protect it from moisture and wear. Options include paint, varnish, or polyurethane.

Test the power strip to ensure it is working properly.

Organize your tools and materials on and around your new workbench.

Conclusion: Your Powered Workbench is Ready!

Congratulations! You've successfully built a powered workbench. Enjoy your organized and efficient workspace. Remember to always practice safety when working with power tools and electrical components. This workbench will undoubtedly enhance your projects for years to come.

```

Homak Garage Series 5 Ft. Industrial Steel Workbench With Cabinet Storage-gs00659031

www.homedepot.com

Mysql :: Mysql Workbench

www.mysql.com

Tennsco Adjustable Workbench — Wood Top, 60in.w X 30in.d, Medium Gray, Model# Wba-1-3060w

www.northerntool.com

Read More

36+ Outdoor Wooden Cooler Stand

www.alliedoutdoorsolutions.com

Introduction: Elevate Your Outdoor Entertaining with a DIY Wooden Cooler Stand Tired of your cooler sitting directly on the ground, collecting dirt and looking out of place? This step-by-step guide will walk you through building a stylish and functional wooden cooler stand, perfect for backyard barbecues, pool parties, or any outdoor gathering. Not only will it keep your drinks cold and accessible, but it will also add a touch of rustic charm to your outdoor space. This project is suitable for beginners with basic woodworking skills and tools.

Materials and Tools You'll Need: Before you begin, gather the following materials and tools:

• Lumber (select your preferred wood type, such as cedar, pine, or redwood. Determine dimensions based on your cooler size and desired stand height. A good starting point would be: four 4x4 posts for the legs, 2x4s for the frame, and 1x6s for the top slats.)
• Exterior wood screws (various sizes for different connections)
• Wood glue
• Wood stain or paint (exterior grade)
• Sealer (exterior grade)
• Measuring tape
• Pencil
• Saw (circular saw or miter saw)
• Drill with drill bits
• Screwdriver (or drill with screwdriver bits)
• Sander or sandpaper
• Clamps
• Safety glasses
• Ear protection

Step 1: Planning and Measuring Measure your cooler's dimensions (length, width, and height). This is crucial for determining the size of your stand. Decide on the desired height of the stand. Consider a comfortable height for accessing drinks without bending over too much. Take accurate notes. Also decide if you want an open design under the cooler, or a shelf.

Step 2: Cut the Lumber Using your measurements and the cut list you created based on your plans, cut all the lumber pieces. This includes the legs, frame pieces, and top slats. Ensure accurate cuts for a professional finish.

Step 3: Assemble the Frame Build the frame of the cooler stand by connecting the frame pieces with wood glue and screws. Use clamps to hold the pieces together while the glue dries. Make sure the frame is square and sturdy. This is a critical foundation for the entire project.

Step 4: Attach the Legs Attach the legs to the inside corners of the frame using wood glue and screws. Ensure the legs are plumb (perfectly vertical) for stability. Use a level to check the alignment. Clamps can be very helpful here.

Step 5: Add the Top Slats Attach the top slats to the frame using wood glue and screws. Space the slats evenly to allow for drainage and airflow. If you prefer a solid top, you can place the slats close together.

Step 6: Sanding and Finishing Sand all surfaces of the cooler stand to create a smooth finish. Remove any sharp edges or splinters. Apply wood stain or paint in your desired color. Once the stain or paint is dry, apply a sealer to protect the wood from the elements. This will prolong the life of your cooler stand.

Step 7: Final Assembly and Inspection Inspect the cooler stand for any loose screws or imperfections. Make any necessary adjustments. Place your cooler on the stand.

Conclusion: Enjoy Your New Cooler Stand Congratulations! You have successfully built a DIY wooden cooler stand. Enjoy your new creation at your next outdoor gathering. Your drinks will stay cold, and your guests will be impressed with your woodworking skills. Remember to properly maintain your cooler stand by cleaning it regularly and reapplying the sealer as needed.

23 Small Backyard Ideas For A Dreamy Outdoor Oasis

www.pinterest.com

Outdoors Wallpapers (51+ Images)

getwallpapers.com

Stunning Outdoor Patio Cover And Pergolas Image Gallery

www.alliedoutdoorsolutions.com

Read More

57+ Blanket Chest

www.walmart.com

Opening: Crafting Your Own Heirloom: A DIY Blanket Chest Want to add a touch of rustic charm and practical storage to your home? Building your own blanket chest is a rewarding project that allows you to customize the size, style, and finish to perfectly match your décor. This step-by-step guide will walk you through the process of creating a beautiful and functional blanket chest that you can cherish for years to come. Let's get started!

Step 1: Planning and Design Before you even pick up a piece of lumber, careful planning is crucial. Consider these factors:

Dimensions: Determine the desired height, width, and depth of your chest. Think about what you'll be storing (blankets, linens, toys) and the available space in your room.

Style: Research different blanket chest styles online or in furniture stores. Do you prefer a simple, clean design or a more ornate, traditional look? This will influence your wood choices and hardware.

Wood Selection: Choose a wood species that suits your budget and aesthetic preferences. Pine is an affordable option, while hardwoods like oak or maple offer greater durability and beauty.

Drawings and Cut List: Create detailed drawings of your blanket chest, including all dimensions. Develop a comprehensive cut list, specifying the size and quantity of each piece of wood required. This will minimize waste and ensure accuracy.

Step 2: Gathering Materials and Tools With your plans in place, it's time to assemble your materials and tools. Here's a basic checklist:

Wood: Based on your cut list, purchase the necessary lumber. Remember to account for potential errors and waste.

Hardware: Hinges, latches, handles, and any decorative hardware you desire.

Fasteners: Wood screws, nails, and wood glue.

Finishing Supplies: Sandpaper (various grits), wood stain or paint, varnish or polyurethane, rags, brushes.

Tools: Circular saw or table saw, miter saw, drill/driver, sander, measuring tape, square, clamps, safety glasses, dust mask.

Step 3: Cutting the Wood Using your cut list as a guide, carefully cut all the pieces of wood for your blanket chest. Precision is key at this stage, so take your time and double-check your measurements before each cut. Wear safety glasses and a dust mask to protect yourself from flying debris and sawdust.

Step 4: Assembling the Box Now it's time to assemble the main box of the blanket chest.

Attach Sides to Front and Back: Apply wood glue to the edges of the side panels and clamp them to the front and back panels. Secure with screws or nails. Ensure that the corners are square.

Attach the Bottom: Apply glue and secure the bottom panel to the assembled sides, front, and back. Again, use clamps and screws or nails.

Reinforce the Corners: Add corner braces or blocks to the inside corners of the box for extra strength and stability.

Step 5: Building and Attaching the Lid The lid is a crucial element of your blanket chest, so pay close attention to detail.

Assemble the Lid Frame (Optional): If you desire a framed lid, build a separate frame using mortise-and-tenon joints or simple butt joints.

Attach the Lid Panel: Glue and screw or nail the lid panel to the frame (if using a frame). Alternatively, simply use a single solid piece of wood for the lid.

Attach Hinges: Position and attach the hinges to both the box and the lid, ensuring smooth and even operation.

Step 6: Sanding and Finishing With the chest assembled, it's time to prepare the surface for finishing.

Sanding: Thoroughly sand all surfaces of the blanket chest, starting with a coarser grit sandpaper and gradually progressing to finer grits. This will create a smooth and even surface for the finish.

Staining or Painting: Apply your chosen stain or paint according to the manufacturer's instructions. Allow to dry completely.

Top Coat: Apply several coats of varnish or polyurethane to protect the finish and enhance its durability. Sand lightly between coats.

Step 7: Adding Hardware and Details The final step is to add the hardware and any decorative details you desire.

Install Latches and Handles: Attach the latches and handles to the chest, ensuring they are properly aligned and securely fastened.

Add Decorative Trim (Optional): Add decorative trim, molding, or carvings to the chest to enhance its aesthetic appeal.

Interior Finishing (Optional): Line the interior of the chest with fabric or cedar to protect your stored items and add a touch of luxury.

Conclusion: Enjoy Your Handmade Blanket Chest Congratulations! You have successfully built your own blanket chest. Take a step back and admire your handiwork. This beautiful and functional piece will be a cherished addition to your home for years to come. Enjoy the satisfaction of knowing that you created something special with your own two hands!

Bedsure Sherpa Fleece Throw Blanket Twin Size For Couch

www.galleon.ph

Bare Home Ultra Soft Microplush Velvet Blanket

www.walmart.com

Piccocasa Flannel Fleece Throw Blanket Waffle Microfiber Fuzzy Blanket Bed, Camel Full

www.walmart.com

Read More